It is perfect for jobs that need to reposition the piece, as its consistency is almost a gel.
Nº3 is an adhesive with strong adhesion power. It is perfect for jobs that need to reposition the piece, as its consistency is almost a gel, that is, it does not run, and can also be used in a vertical or perpendicular position. Adheres to all types of surfaces, even the roughest and most irregular. CHARACTERISTICS: Its base is cyanoacrylate, an adhesive developed for bondings that need speed and resistance. Adhesion occurs as soon as the adhesive comes into contact with air, that is, immediately after application. Its consistency is the most sticky (almost a gel). HOW TO USE: Clean the surface to be glued so that it is free of oils, dust, etc. Apply a thin layer to the surface (do not overdo it, as excess product will impair the bonding performance). Join the parts to be glued and press for 20 seconds so that the initial adhesion is completed and the part can now be handled. Recalling that full membership will happen in 24 hours. PRECAUTIONS: Excess glue impairs gluing. Glues skin and eyes in a few seconds. Keep out of the reach of children. Polymerization of cyanoacrylate generates heating. Depending on the amount spilled on the clothes, the temperature rises enough to cause a burn. TECHNICAL DATA: Viscosity (cP): 1,400 to 1,800 Working Temperature (ºC): -55 to 80 Clearance Filling (mm): Up to 0.20 Shear Strength (Steel x Steel): ≥ 100Kgf / cm2
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Warning: Keep away from children, Always read material safety data sheet and technical data sheet before using the product. Keep away from children.