Nº2 is a super versatile adhesive, as it adheres to several types of materials such as rubber, nitrile rubber, neoprene, EVA, among others. Used in the most diverse techniques, it is considered a wildcard in works of art and crafts.
CHARACTERISTICS: Its base is cyanoacrylate, an adhesive developed for bonding that requires speed and resistance. Adhesion occurs as soon as the adhesive comes into contact with air, that is, immediately after application. Its consistency is between Craft Nº1 (more liquid) and Craft Nº3 (almost a gel).
HOW TO USE: Clean the surface to be glued so that it is free of oils, dust, etc. Apply a thin layer to the surface (do not overdo it, as excess product will impair the bonding performance). Join the parts to be glued and press for 20 seconds so that the initial adhesion is completed and the part can be handled. Remembering that full membership will happen in 24 hours. Precautions: Excess glue impairs gluing. Glue skin and eyes in a few seconds. Keep out of the reach of children. Polymerization of cyanoacrylate generates heating. Depending on the amount spilled on the clothes, the temperature rises enough to cause burns.
TECHNICAL DATA: Viscosity (cP): 80 to 120 Working temperature (ºC): -55 to 80 Slack fill (mm): up to 0.10 Shear strength (steel x steel): ≥ 100Kgf / cm
Net weight of the product is 20 grams Making toys, crafts, kitchen and bathroom cabinets, wooden and plastic frames Bonding 3D printed parts, PVC and Acrylic boards, vinyl banners, and porous surfaces Repairing counter top edges, sleepers, and shoes and Fixing wood/metal pins.
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Warning: Keep away from children, Always read material safety data sheet and technical data sheet before using the product. Keep away from children.